If you’re looking for a simple way to get better sound from your music, a https://www.smarttechmed.com/product-category/endoscope-accessories/bending-section-mesh/ can be a great choice. These plugins offer an array of useful features, including EQ and De-essing. You can even use them as direct outputs to send a signal to another device, such as a tape recorder. To plug a mono phone plug into these jacks, you’ll need a 1/4-inch mono phone plug. This won’t interrupt the flow of signal through the mixer.

Modus EQ

The Modus EQ https://www.smarttechmed.com/product-category/endoscope-accessories/bending-rubber/ offers a variety of EQ settings and effects. It is compatible with MacOS and Windows. It also runs in 64-bit mode and is available in VST 2/3, AU, AAX, and RTAS formats. Developed by Brainworx, the plug-in uses the same technology as its hardware cousin. To get the best out of the Modus EQ Bx, the center knob should be turned to the M&S mode. It is recommended to use two instances of the plug-in.

De-essing

The basic design of a de-essing plug-in is a compressor with frequency specific controls. The de-esser can be a separate plug-in or part of an EQ. Regardless of the format, it is important to use different de-essing plug-ins on each track. One important tip when de-essing is to activate delay compensation.

Dynamic range compression

Using dynamic range information to determine the right compression settings can be very beneficial, as it can help improve subjective comfort and ease of listening. These benefits may help improve the fit and may even improve speech intelligibility. However, it is important to note that CR based on dynamic range information is only appropriate for an “average” hearing impaired listener and may fall short of an individual’s loudness requirements.

Direct output

Bx channel inserts can send direct out signals to another mixer or recording device. The jack has an input and an output and is called an insert jack. The tip of the jack is the signal input and the ring is the signal return. When you insert a signal processor into the Bx channel insert, the signal is routed through the jack and the sleeve acts as a ground connection. This connection makes it possible to use one Bx channel insert as a direct out.