Steel band saw blade

Choosing the Right Band Saw Blade

Choosing the right blade is vital for optimal cutting performance. The blade thickness should be tailored to the requirements of each cutting task.

When a blade is too thick, excessive heat is created during cutting and it can cause premature breakage or dulling. Also, excessive feed pressure can cause the teeth to wear prematurely.


Bi-metal Steel band saw blades are ideal for a wide range of ferrous and non-ferrous materials. They offer a high level of cutting efficiency, easy penetration and a quality surface finish. They are suitable for cutting structural and carbon steels, tool and stainless steels and nickel based alloys.

They are also ideal for use with abrasive and dense wood materials such as engineered timber products and hardwoods. When ripping steel cutting band saw blade lumber, they are capable of a clean and precise cut with minimum chipping or splitting.

Compared to carbon or carbide blades, a Bi-metal bandsaw blade is much more economical as it can be used in a wider variety of applications. It is especially useful in a variety of metal cutting applications, such as steel service centers, small to large manufacturers and fabricators. It can also be used in maintenance or job shops that cut a variety of materials and shapes.

They have a high speed matrix cutting edge that is electron beam welded to a low alloy shock resistant back. They can withstand temperatures up to 1000 degrees F and can last 10 times longer than a carbon hardback or flex back blade. They are commonly used for general metal cutting, production cutting, resawing exotic woods and interrupted cutting in mixed material applications. They can also be used for radii cuts in difficult to machine die steels and for contour cutting.


The 105″ Carbide-tipped Steel band saw blade from Olson Saw is the perfect fit for most vertical, stationary and floor standing two wheel bandsaws. It is specifically designed to handle the heaviest cuts of abrasive wood and dull fiberboard or plywood. It features a tempered steel backer that provides optimum beam strength and reduces bandsaw blade fatigue to ensure a long lasting, high performance cut. Its tungsten carbide tips are ground with a unique triple chip shape that allows for cutting efficiency while still being able to withstand the wear and tear of tough wood materials.

These blades feature a wide range of tooth patterns that are optimized for the various materials you’ll be cutting. Choose a skip-tooth pattern for soft materials, and a regular-tooth pattern for harder materials. You can also opt for a variable-tooth pattern if you need to make more intricate cuts.

When using a carbide-tipped bandsaw blade, it is important to understand how to properly use them to get the most out of your investment. Using the right bandsaw machine, following recommended cutting speeds and performing preventative maintenance will help you get the most out of your bandsaw blades and avoid premature failure. You can also get the most out of your blade by working with an experienced or well-trained operator, who will be more likely to correctly install the blade without breaking the teeth, break it in to achieve faster rates and perform proper machine maintenance to extend the life of the blades.


Whether you’re cutting wood or metal, a skip-tooth band saw blade can help you complete your projects. This type of band saw blade features wide gullets and a 0 degree rake angle, which helps prevent clogging while still delivering an excellent chip-carrying capacity. You can use this bandsaw blade for a variety of materials, including wood, plastic, and soft and hard ferrous and non-ferrous metals. It also has a flexible carbon steel design, making it ideal for all types of applications.

When choosing a bandsaw blade, it’s important to consider the thickness of your workpiece. A bandsaw blade with a larger kerf will be able to cut through thicker material than one with a smaller kerf. This is important because different materials have varying hardness levels and structures, and Tinplate steel coils Manufacturer each will require a different cutting speed. This information is often included on the product packaging, though you can contact the manufacturer directly if it is not listed online.

When selecting a bandsaw blade, make sure it can fit your saw’s drive wheel and that the motor is capable of turning the blade at the desired speed. You should also ensure that the width of the blade matches the thickness of your workpiece. Thinner blades are better for curve cuts, while wider blades are better suited to straighter cuts.


There are many different types of band saw blades available for cutting metal. These include bi-metal, carbon steel, and carbide tipped blades. The type of blade you choose should be based on the materials that you are cutting and the application. The type of blade you use will determine how well your cuts will turn out. The different blades have differing grades of steel, tooth formation and tooth set, and blade width.

The teeth on a bandsaw blade are usually arranged in groups of left and right, with unset raker teeth in between. This pattern reduces stress on the individual set teeth and helps prevent tooth stripping. It also allows the blade to cut a variety of shapes and thicknesses without having to change the blade. The wavy set pattern is a good choice for cutting tubes, pipes, and thin metal sections.

Choosing the proper blade for your metal cutting job is important. Some precautions should be taken to avoid abnormal wear and premature blade failure. Using the correct speed for your material will also help extend the blade life. The speed should be listed on your machine’s operator’s manual or by your manufacturer. You should never cut metal at a rate faster than recommended. Moreover, the blade should be properly fitted to the machine to avoid damage.

By admin

Leave a Reply

Your email address will not be published. Required fields are marked *