If you have an https://www.smarttechmed.com/product-category/endoscope-accessories/insertion-tube/, you may be wondering how to clean it. You need to follow a few steps, which we’ve listed below. You should also take note of any filters or screens on the attachments. These can be difficult to clean, but are necessary to keep your unit functioning properly. Clean the screens and filters every time you use your unit. Here’s how. Listed below are some tips to help you clean your https://www.smarttechmed.com/product-category/endoscope-replacement-parts/video-heads-buttons/.

Cleaning an Air / Water Channel Assembly

When cleaning an air / water channel assembly, there are several important steps to follow. First, remove all debris from the air / water channel. This step is crucial for preventing the channels from becoming contaminated. The next step is to disinfect the channels with the appropriate solution. Then, rinse and dry the reusable parts. Once dry, sterile water should be placed in the irrigation bottles. If you are unable to sterilize these parts, use a cleaning solution to disinfect them.

Cleaning screens

In order to clean the screens on your air / water channel assembly, turn on your vacuum. Set the hose to a low pressure. Powerful nozzles will loosen the screen from the spline and cause gaps between the screen and the frame. You can use distilled water to clean stubborn dirt and oil from the screen. Afterward, wipe the screen with a microfibre cloth and dry it thoroughly.

The process of cleaning screens on an air / water channel assembly is quite easy if you follow these steps. This assembly can be installed in a short period of time and is highly practical for its intended use. The following description and the accompanying drawings will help you understand how to clean the screens of your air / water channel assembly. It is important to label the metal frame before you begin to clean. Use tape or a marker to label the frames.

Cleaning screens with filters or screens

There are three main types of pre-filters: automatic roll, panel, and pocket. The panel filter is almost universal in buildings handling air flows of 4000 m3/h or less. Automatic roll filters are also available with disposable media. For larger installations, automatic viscous screens are used. The media must be kept wet with a special fluid to improve their dust capacity and filtration efficiency.